bowtech techs please help
#1
Typical Buck
Thread Starter
Join Date: May 2007
Location: Belgium
Posts: 996
bowtech techs please help
Frustrated I am, just been to the bowtech dealer and didn't solve my problem.
My 82nd airborne is synched but the braceheight is too small and I only have 55# and my 60# limbs are maxed out.
Can someone give me some decent advice to fix this ?
I need 3mm more braceheight and 2 1/2 pounds more poundage.
thx
Frank
Belgium
My 82nd airborne is synched but the braceheight is too small and I only have 55# and my 60# limbs are maxed out.
Can someone give me some decent advice to fix this ?
I need 3mm more braceheight and 2 1/2 pounds more poundage.
thx
Frank
Belgium
#2
Sounds to me like you need to give your cables a few twists. Make sure you turn both cables equal amounts of twists when doing so.
You did not mention what your draw length was coming in at. My guess is, it will be short given the information you provided. Adding twists to your cables should restore lost draw weight, add brace slightly and add draw length.
You did not mention what your draw length was coming in at. My guess is, it will be short given the information you provided. Adding twists to your cables should restore lost draw weight, add brace slightly and add draw length.