I went to lancaster archery to get my pse xforce dream season gx setup. The guy talked me out of getting the limb drive rest and spott hogg sight to a trophy taker rest and a hhc sight. We got everything setup with carbon maximu 350 arrows cut to 28 inches and 100 grain points and poundage set at 65lbs. We started paper tuning with a low right tear (I'm left handed). we did around 20 shots and made changes to rest on every shot with the same result of low right tear. the tech then went to the back of the shop to check the timing and after 15 minutes he came and got me to tell me that the lower cam was smashed where the cable attaches to the cam. I don't know how this would happen but he did call PSE and they are shipping a new set of cams, limbs and cables for a 2010 dream season gx. This sucks because I traveled 2.5 hours to get to the shop and now I have to go back when the parts come in. I'm still not convinced that this rest will work and I'm thinking of asking them to either put the limb drive rest or qad hd rest on it. Any suggestions?