hoyt ultratec 03
05-16-2003, 01:52 AM
#1
Thread Starter
Join Date: Feb 2003
Location: parkersburg wv USA
Posts: 10
hoyt ultratec 03
I was interested in a hoyt ultratec 03. I was wondering about the spiral cams are they 65 let-off or 75? also if i had set at 27 inch draw 70 pounds shooting 350 grain arrow what speeds could i expect? I only use a string loop and peep without tube. Please give any info on this bow setup with spiral cam that u can. tHANKS
05-20-2003, 07:26 AM
#2
Join Date: Feb 2003
Location: Pewaukee WI USA
Posts: 42
RE: hoyt ultratec 03
I shoot my UT at 30 draw and 68 lb. Arrow 390 grain speed 292 fps. One brass nock, ture peep and two leeches on the string.
The difference with let off between 65% and 75% is 1 pfs, 65% let off to be faster than 75% let off. 350 grain arrow at 68 lb flew at 308 fps.
Spiral cam wil be about 5 faster than cam 1/2. Remember, when you by cam 1/2 make sure you choose the cam set up to shoot at the end of the cam. They shoot faster. My cam is set up at E position, where it A is the shortest and F is the longest. For more answers you can go to hoyt.com forums.
Vodek
The difference with let off between 65% and 75% is 1 pfs, 65% let off to be faster than 75% let off. 350 grain arrow at 68 lb flew at 308 fps.
Spiral cam wil be about 5 faster than cam 1/2. Remember, when you by cam 1/2 make sure you choose the cam set up to shoot at the end of the cam. They shoot faster. My cam is set up at E position, where it A is the shortest and F is the longest. For more answers you can go to hoyt.com forums.
Vodek
