field point diameter?????
08-10-2009 | 11:03 AM
#1
Thread Starter
Typical Buck
Joined: Feb 2008
Posts: 603
Likes: 0
From: outback Australia in england now
field point diameter?????
simple question just i dont know the answer im useing 340 easton shafts but not sure what diameter saunders combo points fit can anyone help thanks
08-10-2009 | 11:27 AM
#2
Nontypical Buck
Joined: Aug 2006
Posts: 2,520
Likes: 0
From: Southern MD
I am guessing it will be 9/32. Go to the Easton websitefind your arrow and selct "more" under the tech and specs area.
http://www.eastonarchery.com/products
http://www.eastonarchery.com/products
08-11-2009 | 11:59 AM
#5
Nontypical Buck
Joined: Feb 2003
Posts: 3,625
Likes: 0
From: Middletown PA United States
Actually most carbon shafts mic out at about .295" or closer to 19/64. Yeah, try to find points of this diameter. The smaller diameter ones such as ST Axis are 17/64" so Easton RPS points work very well on these.
Most people just go ahead and use 9/32" points on Epics and such. Some companies such as Gold Tip make an insert with a reverse taper that uses a 5/16" point and reduces to 19/64" at the shaft.
Most people just go ahead and use 9/32" points on Epics and such. Some companies such as Gold Tip make an insert with a reverse taper that uses a 5/16" point and reduces to 19/64" at the shaft.
