arrow insert help
#1
Typical Buck
Thread Starter
Join Date: Feb 2008
Location: outback Australia in england now
Posts: 603
arrow insert help
can anyone tell me what inserts i need for my carbons i have redhead carbon shafts at 300 spine not sure which inserts i need i used some bad glue and there shooting out after hitting the targets so i need some more but dont want to order the wrong size
#5
RE: arrow insert help
#6
Typical Buck
Thread Starter
Join Date: Feb 2008
Location: outback Australia in england now
Posts: 603
RE: arrow insert help
sorry guys
but i got it all wrong had the arrow shafts labels covered with some arrow wraps and totally forgot what i was shooting
so i have redhead carbon carbon max 2 hunters 350 (not 300)
so there what i need the inserts for (which ones do i order) and correct dia field points
thanks guys
but i got it all wrong had the arrow shafts labels covered with some arrow wraps and totally forgot what i was shooting
so i have redhead carbon carbon max 2 hunters 350 (not 300)
so there what i need the inserts for (which ones do i order) and correct dia field points
thanks guys
#8
Guest
Posts: n/a
RE: arrow insert help
Ok, I called down to bass pro in Hanover, MD and they said that arrow is same arrow as carbon express aramid, and you have two choices. You can get a carbon express "point Insert #1" or redhead T3640. I know carbon express has like 4 different inserts.
#10
Fork Horn
Join Date: Jan 2009
Location: Belmont, MS.
Posts: 292
Don't know about the Max2 shafts but 5/16 is the most common size points for most carbon arrows. You need to measure your inserts that are in your arrows now to get a size. Just make sure the new points don't extend beyond the shaft or they'll be hard to remove from targets. Bigcountry is right about the inserts if they are the same as the aramid it will use the Type1 C E inserts. I believe the redhead # is 38-833-786-00.