arrow insert help
 

can anyone tell me what inserts i need for my carbons i have redhead carbon shafts at 300 spine not sure which inserts i need i used some bad glue and there shooting out after hitting the targets so i need some more but dont want to order the wrong size

RE: arrow insert help
 

oh and forgot what diameter for the field points??? cant remember what size fitted the m

RE: arrow insert help
 

Don't know the answer. But I have a bass pro down from my work, and can ask them tomorrow.

RE: arrow insert help
 

Need to Know which Redhead shafts you are shooting to determine which insert.

RE: arrow insert help
 

http://www.basspro.com/webapp/wcs/stores/servlet/SportingGoods_Archery--Arrows_10151_-1_10001_advisor_CA.CategoryExpand_N_450002000_4500 00000

See if this site helps you out.

RE: arrow insert help
 

sorry guys
but i got it all wrong had the arrow shafts labels covered with some arrow wraps and totally forgot what i was shooting
so i have redhead carbon carbon max 2 hunters 350 (not 300)

so there what i need the inserts for (which ones do i order) and correct dia field points
thanks guys

RE: arrow insert help
 

still need help guys please

RE: arrow insert help
 

Ok, I called down to bass pro in Hanover, MD and they said that arrow is same arrow as carbon express aramid, and you have two choices. You can get a carbon express "point Insert #1" or redhead T3640. I know carbon express has like 4 different inserts.

thanks for checking that can anyone tell me the correct dia for the field points thanks then i can try to get an order in

Don't know about the Max2 shafts but 5/16 is the most common size points for most carbon arrows. You need to measure your inserts that are in your arrows now to get a size. Just make sure the new points don't extend beyond the shaft or they'll be hard to remove from targets. Bigcountry is right about the inserts if they are the same as the aramid it will use the Type1 C E inserts. I believe the redhead # is 38-833-786-00.