RE: Silencing a speed bow.
 

Swamp Collie was correct about the spacers. They are on the right if your right handed, left if your left handed.
Derek

RE: Silencing a speed bow.
 

K, Looks like my Axle is approximately 13/4" long. sorry i cant be more specific. All I have is a ruler, and a good eye tonite. When measuring the axle, I closed one eye, and centered the string with my riser to make sure i was centered.

The distance between my limbs is 3/4"ID.

The distance from the inside of my limb tip (on the spacer side)to the CAM (past the string) was 1/2".

I know these measurements arent very close or specific but its ballpark and may help you a little bit.
Derek

RE: Silencing a speed bow.
 

Mine match up pretty close on the top one, I but couldn't measure the length of the bottom axle. I think that it is fine and all I need to do is get an e-clip put on.

RE: Silencing a speed bow.
 

definately have them put it in a press and double check everything though. make sure the axle is still straight, and you might as well have them check everything else (bearing, and spacer position) ask them if that spacer has to be a certain way or not and make sure it is right. if you dont think they know enuff call bowtech and talk to them.
Derek

RE: Silencing a speed bow.
 

Alright, that sounds good. Thanks everyone for your help.