I Just Don't Understand This One.
#11
Join Date: Feb 2006
Location: Kodiak, AK
Posts: 2,877
RE: I Just Don't Understand This One.
As a specific example in addition to those already offered; A longer riser is harder to torque around the fulcrum point (grip) than a shorter due to the leverage required to move it. Take a yard stick (36") , hold it in the center at arms length and try to move/sway the tips back and fort. Now do the same with a ruler (12") and you'll see how much easier it is to move the shorter ruler. Same physics apply with a long riser vs. a short one.
#13
Thread Starter
Join Date: Sep 2008
Location:
Posts: 93
RE: I Just Don't Understand This One.
Thank you all for your responses. Sounds like it wouldn't be impossible with a short ATA bow, but very unlikely, and I understand why now. Thanks again to everyone who took time to respond.
#15
Guest
Posts: n/a
RE: I Just Don't Understand This One.
All I can say is go and try one. A longer bow is much more stable to hold and after the shot. Same way a guy on a balance beam has a longer balance stick. Imagine if he had a 3ft balance stick same wieght as say a 30ft one. The 30ft is going to move much more slowly.
What happens after a shot is important. The more stable the bow is, better accuracy is. I come from the world of 45" compounds from the 80s, and definately notice this. But I don't miss the noise and handshock.
What happens after a shot is important. The more stable the bow is, better accuracy is. I come from the world of 45" compounds from the 80s, and definately notice this. But I don't miss the noise and handshock.