i have called different bow shops and got different answers..can anyone help...i have a 69lb bow...a 28 inch draw..and i am using 28" beman ics hunter 340s with100 grain heads...I want to go down to 27" arrows and am not sure on the spine...do i need a different size ...please help..thanx... ps i am using them for hunting deer if it helps

Stay at 28" for the 340 series arrowwith a 100 grain tip.

What are you wanting to accomplish by chopping off an inch of arrow?

Beman inserts are about 1 1/4" long so you would have to go more than just an inch to get past the insert.

i have 3" of arrow past my rest andwas told i cango with a shorterarrow...i want to buy some more arrows... the same brand as my others ics hunters just an inch shorter..any info..?

I would stick with the 340's. You could go to 400's but they are right on the line of being not stiff enough.

It's FOOLISH at best to go that extent just to shorten an arrow 1", plus you maintain a better FOC keeping that 28" worth of arrow, and you keep your spine a little better (cutting off that inch will stiffen your spine just a touch, and you're on the stiff side anyhow. Just because you "CAN" doesn't mean you "SHOULD!!!!" I shoot my arrows a 29.5" because I like the extra length on them and they balance out better.