Rangeball

On the Bowtech post feed single cam, can you change the draw length module without using a bow press? Inquiring minds need to know...

Big John

Yes. If you have the infinity cam you will also need to move the draw stop to the appropriate position also.

BowTech_Shooter

Big John is correct no press needed with Infinity Cam or the Post Feed Cam with the exception of the new Rascal and Stalker Lite (the cam is to small to add this feature) If your not sure where to set the stop after changing the mod let me know and I'll email you a diagram. I should also add that this feature was added to the 2001 line but, the 2000 models need the cam moved a little to get to all the screws. I've done it without a press but it's easier with one. TTYL, Pat

Edited by - BowTech_Shooter on 01/21/2002 18:57:35