how can you tell the difference in single or double cam?
02-28-2003 | 08:29 PM
#1
Thread Starter
Joined: Feb 2003
Posts: 384
Likes: 0
From: asheboro, nc
how can you tell the difference in single or double cam?
i have a hoyt magnatec with the xt2000 split limbs and i was wondering how can do you know the difference between and single cam bow and a duel cam bow. i have only been bow hunting for a little while and am not up to speed on all that i need to know.
02-28-2003 | 08:38 PM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: how can you tell the difference in single or double cam?
A single cam will have a large cam on the bottom and a round wheel on the top.
A dual cam will have 2 cams one on top and the other on the bottom
A dual cam will have 2 cams one on top and the other on the bottom
03-01-2003 | 10:22 AM
#3
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: how can you tell the difference in single or double cam?
....and in the case of the Cam and a half design, it will initially look like a dual cam bow but a closer look at the cams will reveal that they are not identical to one another.
03-03-2003 | 07:28 AM
#4
Typical Buck
Joined: Feb 2003
Posts: 567
Likes: 0
From: Buford GA USA
RE: how can you tell the difference in single or double cam?
Man guys, you are leaving out the easiest way to tell:
On single cams there is only one split-yolk cable (attaching to the top limb), on dual cams there are 2 (attaching to both limbs)
On single cams there is only one split-yolk cable (attaching to the top limb), on dual cams there are 2 (attaching to both limbs)
