HuntingNet.com Forums - Tuning problems

Page 3 of 3

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - Tuning problems (https://www.huntingnet.com/forum/technical/239013-tuning-problems.html)

archer58

03-29-2008 08:23 PM

RE: Tuning problems

If you can rule out the spine issue as the problem I would suggest another avenue.
TFOX told me a long time ago when I was tring to tune my Trykon to get rid of the floating yoke.
I did... and the problems w/ the POI of bh's and fp's vanished.
Just a thought.

Talon1961

04-18-2008 07:04 PM

RE: Tuning problems

Quote:

ORIGINAL: IA Buck Hunter

You are underspined with the 250's. I shoot 29in 350's at 70# and mybroadheads hit EXACTLY where my fieldpoints do. There are a less expensive arrows out there that will work just as good for ya, but if you stick with the Maxima's then switch to 350's.

I agree you are underspined. I shoot 28" 350's at 73# and at 70#. The CX 300's or 400's (preferrable) are less expensive, but the Maxima 350's should get your broadheads back w/FT's. I bought 3 250's and 3 350's to compare out of My Ross Cardiac. Hands down, the 350's at 70# were dead on accurate w/broadheads and FT's.

treboryerf

04-18-2008 08:34 PM

RE: Tuning problems

Make sure your flecthing is not hitting anything,put a helecal on your fletching
.You my want to back of your poundage some and if you are underspined this should show it,then you go get a stiffer spined arrow and bump yoyr weight back up.

All times are GMT -8. The time now is 05:25 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page