would this work?
03-13-2008 | 03:40 AM
#12
Nontypical Buck
Joined: Feb 2007
Posts: 2,188
Likes: 0
From: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
RE: would this work?
Brandon,
You are doing that right. As far as your bow's DL. What was your bow set up for? What does the sticker say on the lower limb? There is a big difference in 1" of DL and definitely will affect spine.
You sure what you were using wasn't for arrow length selection and not DL? If has a rest on it with markings and you draw it back and look at where the mark is in relation to the rest it's for arrow length, not DL.I have a 30" DL and can shoot a 27" arrow based on rest position.
Make sure you select Hunting and not Target in the Spine Sizing tab. Eitherway, you could still can use the 29" arrow and if your DL is 28" it would work even better.
You are doing that right. As far as your bow's DL. What was your bow set up for? What does the sticker say on the lower limb? There is a big difference in 1" of DL and definitely will affect spine.
You sure what you were using wasn't for arrow length selection and not DL? If has a rest on it with markings and you draw it back and look at where the mark is in relation to the rest it's for arrow length, not DL.I have a 30" DL and can shoot a 27" arrow based on rest position.
Make sure you select Hunting and not Target in the Spine Sizing tab. Eitherway, you could still can use the 29" arrow and if your DL is 28" it would work even better.
03-13-2008 | 09:09 AM
#13
Nontypical Buck
Joined: Feb 2007
Posts: 2,531
Likes: 0
From: SE Ohio
RE: would this work?
I suppose another question is..."How tall are you???" Or have you tried the "wingspan" method for drawlength??
Dave, how do you get the page to copy and show up like that. I just bought OT2, but can't figure out how to cut-paste with it.
Dave, how do you get the page to copy and show up like that. I just bought OT2, but can't figure out how to cut-paste with it.
03-13-2008 | 09:42 AM
#14
Nontypical Buck
Joined: Feb 2007
Posts: 2,188
Likes: 0
From: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
RE: would this work?
That's a good question OH about his DL. From the picture I'd bet that bow is 28" and not 27".
You have to do a print screen command. "CTRL+ print Screen" and then past that into the picture softare you have. Then crop the picture accordingly. To post it you will have to compress the image and such.
You have to do a print screen command. "CTRL+ print Screen" and then past that into the picture softare you have. Then crop the picture accordingly. To post it you will have to compress the image and such.
03-13-2008 | 09:46 AM
#15
Nontypical Buck
Joined: Feb 2007
Posts: 2,531
Likes: 0
From: SE Ohio
RE: would this work?
ORIGINAL: davepjr71
That's a good question OH about his DL. From the picture I'd bet that bow is 28" and not 27".
You have to do a print screen command. "CTRL+ print Screen" and then past that into the picture softare you have. Then crop the picture accordingly. To post it you will have to compress the image and such.
That's a good question OH about his DL. From the picture I'd bet that bow is 28" and not 27".
You have to do a print screen command. "CTRL+ print Screen" and then past that into the picture softare you have. Then crop the picture accordingly. To post it you will have to compress the image and such.
