Bow not reaching peak DW

Reply Subscribe

Thread Tools

03-03-2008 | 05:36 PM

#11

gzg38b

Nontypical Buck

Joined: Oct 2005

Posts: 2,355

Likes: 0

From: Flushing Michigan

RE: Bow not reaching peak DW

Is the ATA in spec?

If so, then it's probably the scale or possibly weak limbs (not likely though).

If the ATA is longer than spec, then yourcables have stretched and they need to be twisted up again.

03-03-2008 | 05:42 PM

#12

badger109

Fork Horn

Joined: Jun 2007

Posts: 380

Likes: 0

RE: Bow not reaching peak DW

When you get your bucknasty strigns and cables

get your hoyt tuned up with this tutorial

03-04-2008 | 06:03 AM

#13

nodog

Giant Nontypical

Joined: Dec 2004

Posts: 7,876

Likes: 0

From: Ohio

RE: Bow not reaching peak DW

Quote:

ORIGINAL: TEmbry

I guess while I am at it I'll go ahead and throw out another question, My bow is set at 65% let off, what is the down side of switching it to 75%? There has to be a down side to less holding weight, I'm to narrow minded to spot it though.[&:]

You should loose some speed if the math I read is right. Often times you'll see a graph showing the draw force curve. What it shows is the energy stored in the bow before the shot. A higher let off will have less of the box blakened/filled meaning less push time. It would be a slight drop. Chrono it and see.