Parker bow question,Please Help!
02-21-2008, 11:16 PM
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Eastern PA.
Posts: 148
Parker bow question,Please Help!
I recently bought a parker ultra-lite with a lot of different modules for the cam.How do you tell which one is what Size draw length?The modules i got are as follows-SAH-SCL-SDH-SEH-&-SFH
THANKS A MILLION IF ANYONE CAN HELP!!
Sincerely.Chas..
THANKS A MILLION IF ANYONE CAN HELP!!
Sincerely.Chas..
02-22-2008, 03:44 AM
#3
Join Date: Sep 2005
Location:
Posts: 265
RE: Parker bow question,Please Help!
I bet it's the same as my UL 31. It should start with an S, like each of them do, then followed by a letter from A-H then have an H or L for the third letter. A stands for 23" draw and H stands for 30" draw. B will be for 24" C will be 25" so on and so forth. The H on the end is for High let off (80%) and the L is for low let off (65%)
You have:
23" draw, 80%
25" draw, 65%
26" draw, 80%
27" draw, 80%
28" draw, 80%
I believe those are the modules you have. If you would like you could email Parker's customer service. [email protected]
Hope this helps. They have good customer service but they can be a little slow.
You have:
23" draw, 80%
25" draw, 65%
26" draw, 80%
27" draw, 80%
28" draw, 80%
I believe those are the modules you have. If you would like you could email Parker's customer service. [email protected]
Hope this helps. They have good customer service but they can be a little slow.
