ACLakey

I am looking to go back to ACC arrows again and am having a tough time choosing a shaft. The TAP software recomends the ACC 3-60 shaft at 27" as a perfect match. The OnTarget software recomends the ACC 3-49 shaft at 27" as a perfect spine match for my setup. I have entered the data for my bow as best as I could in both software applications. All measurments were real world using a chrono. My setup is as follows.

2001 Hoyt Vortec Saber Cam 37" ATA, 7.375" BH
29" Draw
70lb draw weight
Peep, Loop and 2 leaches on string
Trophy Taker Fall away
125gr tip, crested, (3) 3" blazers

Any thoughts or recomendations?

Roskoe

With the shorter 27" arrow, you are in the grey zone between the two spines. But with the 125 grain head, I would go with the stiffer 3-60 shaft.

TFOX

Calibrate with a chrono speed and forget the preset numbers.They will probably both be very close at that point to being the same.