When i pull back my matthews legacy i hear a tick up by the upper limb right where it connects to the riser. Does any one have a soulution to that problem? But it is a brand new bow.

"The bigger they are the bigger the harder fall."

Are the limb bolts tight?

Could just be dry limb pockets. Squirt some lube, either silicone or teflon, into the pockets and see if it stops.

I had that problem with one of my Mathews bows last year, and was sorta worried. Turned out I had misassembled the cables so they crossed over above the guard not below. But it sounded like a limb problem.

Whas the bow dry fired? If so the bow could be out of alinement. Good luck.