Excuss the novice here, but where can I get nocks that work in my new Goldtip XTs. Is there a "nock off" nock or do I have to order them from Goldtip. I need a couple of different colors. I sure do like the little allen wrench thing. Once I have them tuned I can lock them into place.

U.S. Army

The nocks should come with the shafts/arrows. If you just need some extras check ebay as there's generally some on there.

easton G-nocks fit the Gold tips.

Easton super nocks and bohning signature nocks will both press in gold tips. If you stay with the gold tip nocks don't over tighten the allen screw or you will crack the nock. Hope this helps.

They say you can split the shaft by overtightening also. I've never had that happen though. Just tight enough they don't move on thier own, but you can turn them if you try. Easton nocks seem to loosen up a bit on me if I have messed with them alot (removed and replaced them several times). Kindof like how the magnocks fit the goldtips loosely, btw.

-Chief

I agree with kop, i use either of the nocks he mentioned, i do not use the gold tip nocks, i don't like them!
Do not buy easton g nocks, they will not fit.
The g nocks are used for acc arrows mostly, they are much smaller and are designed to press fit into an aluminum nock taper.
Easton super nocks or the bohning signature, will do the trick.

Brian

oops...<img src=icon_smile_blush.gif border=0 align=middle>

My brain meant uni-nocks, my fingers said G-nocks

No problem Rack, i have brain cramps a couple times a day myself!
<img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_wink.gif border=0 align=middle>

Brian