Hoyt cable configuration
01-09-2003 | 08:15 PM
#1
Thread Starter
Spike
Joined: Feb 2003
Posts: 17
Likes: 0
From: Carlton MN USA
Hoyt cable configuration
Can someone help with how a 2001 protec should be set up? My dealer is a great guy, but lax on details. He had my cable guard backwards,(according to the manual), but I have no details as to whether the cables should cross above or below the cable guard. I know the short slot in the guard should be towards the shooter. I have the versa-cam. Thanks in advance!
01-10-2003 | 08:00 AM
#3
Joined: Feb 2003
Posts: 105
Likes: 0
From: Louisville Kentucky USA
RE: Hoyt cable configuration
Here's is a pretty good general rule to go by:
"CABLES CROSS:
Little rule of thumb
upper cableguard-----cross below
lower cable guard-----cross above
This is the method use the most here at the plant
From Levi @ PSE"
Hope this helps.Be safe.
Shoot Straight
Derbytown <img src=icon_smile_big.gif border=0 align=middle>
“An archer wants to see how far away from the target he can get and still hit it. A bowhunter wants to see how close he can get to his target before he shoots.”
Dr. Mark Timney
"CABLES CROSS:
Little rule of thumb
upper cableguard-----cross below
lower cable guard-----cross above
This is the method use the most here at the plant
From Levi @ PSE"
Hope this helps.Be safe.
Shoot Straight
Derbytown <img src=icon_smile_big.gif border=0 align=middle>
“An archer wants to see how far away from the target he can get and still hit it. A bowhunter wants to see how close he can get to his target before he shoots.”
Dr. Mark Timney
