what do I need ?
07-24-2007 | 12:45 PM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 9,175
Likes: 0
RE: what do I need ?
Bare minimum requirements are a high speed arrow saw and a fletching jig. For jigs, I like Bitzenberger and JoJan, in that order.
To kick it up a notch, you need an accurate grain scale, arrow spinner and spine tester.
To kick it up a notch, you need an accurate grain scale, arrow spinner and spine tester.
07-24-2007 | 01:59 PM
#4
Joined: Jan 2006
Posts: 2,116
Likes: 0
From: Maryland
RE: what do I need ?
Arrow Saw (Dremmel works great)
Jig (Bitzenburger is the best)
ASD (Arrow Squaring Device made by G5)
Glue (Goat Tuff)
Vanes (Blazers)
Inserts, Nocks and Tips (obviously)
Q-tips
Diluted Rubbing Alcohol
Water
Paper Towels
300 Grit Sand Paper
Test Tube Brush (for cleaning out the inside of the arrow shaft)
Sharp Knife
Flething Removal Tool
A few beers, some time and patience.
Jig (Bitzenburger is the best)
ASD (Arrow Squaring Device made by G5)
Glue (Goat Tuff)
Vanes (Blazers)
Inserts, Nocks and Tips (obviously)
Q-tips
Diluted Rubbing Alcohol
Water
Paper Towels
300 Grit Sand Paper
Test Tube Brush (for cleaning out the inside of the arrow shaft)
Sharp Knife
Flething Removal Tool
A few beers, some time and patience.
07-25-2007 | 02:20 PM
#5
Thread Starter
Typical Buck
Joined: May 2007
Posts: 996
Likes: 0
From: Belgium
RE: what do I need ?
Ok, got your list Josh, but how do the beers fit in the picture ??? or are you one of those guys who needs a few beers just to stop trembling.....
only kidding, thx anyways
only kidding, thx anyways
