HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Lumenocks, Tracer Nocks, Archers Flame? Help? (https://www.huntingnet.com/forum/technical/182340-lumenocks-tracer-nocks-archers-flame-help.html)

nwochuck 03-16-2007 04:20 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
http://www.youtube.com/watch?v=hMqLT-4ezzk
Here is the link to DIY Luma nocks I have made some.
Cost me less then $3.50 each.

Buckfeveragain1969 03-16-2007 04:49 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
have you tried this with the ST shafts or H nocks?

Avalanche 03-16-2007 05:08 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
Stay away from the Lumenocks, I've tried them for two years now and they only work half the time. The home brew version does look interesting, I might try that.

Buckfeveragain1969 03-16-2007 06:00 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
i have heard a few people say that about the lumenocks.That home brew looks good.I will try to make one for the H nock,might have to drill them out alittle to make it work.We will see

Buckfeveragain1969 03-16-2007 06:08 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
Avalananche,where in upstate are you from?

Avalanche 03-16-2007 10:45 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 

ORIGINAL: Buckfeveragain1969

Avalananche,where in upstate are you from?
Steuben County

emwoz 03-17-2007 01:29 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
I used Archers Flame. They were VERY bright and worked well. I ceased using them because I discoverd that they really decreased my FOC of my arrow (weigh too much). I feel this is really critical when usingfixed-bladed broadheads.
I'll sell you mine for cheap!! Almost brand-new..:D

Buckfeveragain1969 03-17-2007 08:33 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
I attempted to make some for the H nock.I can only find the twist type around here.I contacted Cabelas about the one they show online and they are also twist.If anyone can tell where to get the push/pull type I would be greatful.thanks

Mike from Texas 03-18-2007 07:48 AM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 
For you guys that are having trouble getting the Lumenoks to work, spend $30 and get you this neat litte tool by G5 called an ASD, arrow squaring device. You'd be amazed at just how bad most arrows are cut from the factory. If you want your arrows to be the best they can be you should have one anyway, and you should do it on bothends of the arrow.I've shot Lumenoks for the past 3 years and have had zero problems on the shafts that I have squared.

lifesadrag 03-18-2007 12:03 PM

RE: Lumenocks, Tracer Nocks, Archers Flame? Help?
 

ORIGINAL: Buckfeveragain1969

I attempted to make some for the H nock.I can only find the twist type around here.I contacted Cabelas about the one they show online and they are also twist.If anyone can tell where to get the push/pull type I would be greatful.thanks
I got some at Gander Mountain.


All times are GMT -8. The time now is 11:03 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.