Beman ICS hunters 340's
01-15-2007 | 02:15 PM
#4
Guest
Posts: n/a
RE: Beaman ICS hunters 340's
Well, with that arrow, your on the edge with spine. If you get a 30" arrow, your might be too weak. But with a 29" arrow, you would be ok. I imagine with a 29.5" draw, you want arrows at least 30". You might have to back down on poundage about 4lbs. Only bareshaft or broad head tuning can tell you for sure. I shoot 340's at 29" arrow length, and had to lower my poundage down to 66lbs for broadhead tuning.
01-15-2007 | 05:28 PM
#6
Giant Nontypical
Joined: Dec 2004
Posts: 7,876
Likes: 0
From: Ohio
RE: Beaman ICS hunters 340's
ORIGINAL: bigcountry
Well, with that arrow, your on the edge with spine. If you get a 30" arrow, your might be too weak. But with a 29" arrow, you would be ok. I imagine with a 29.5" draw, you want arrows at least 30". You might have to back down on poundage about 4lbs. Only bareshaft or broad head tuning can tell you for sure. I shoot 340's at 29" arrow length, and had to lower my poundage down to 66lbs for broadhead tuning.
Well, with that arrow, your on the edge with spine. If you get a 30" arrow, your might be too weak. But with a 29" arrow, you would be ok. I imagine with a 29.5" draw, you want arrows at least 30". You might have to back down on poundage about 4lbs. Only bareshaft or broad head tuning can tell you for sure. I shoot 340's at 29" arrow length, and had to lower my poundage down to 66lbs for broadhead tuning.
I'd go with the elites in that shaft. I like them better.
01-16-2007 | 05:45 AM
#8
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: Beaman ICS hunters 340's
No nodog, I shoot a 340 at 29" out of my liberty at 67lbs. And its on the edge. If his draw is 29.5, then he would want to shoot a 30" arrow. Maybe 30.5". And 340 is too weak.