!/2" tear right...can't get any better
#11
RE: !/2" tear right...can't get any better
Gibblet might be right.Have someone look at the cams from behind when you are at full draw and see if the cams look like they are leaning a little.The ideal way is to put it on a machine but most don't have access to that.
I am trying to remember if the Raptor I had trouble with had cam lean.I don't think it did because I do remember changing all the shims to try and shift the cams but nothing helped.
I am trying to remember if the Raptor I had trouble with had cam lean.I don't think it did because I do remember changing all the shims to try and shift the cams but nothing helped.
#12
Thread Starter
Join Date: Jun 2005
Location:
Posts: 67
RE: !/2" tear right...can't get any better
I tried my grip....I have ruled that out. I tried a cx-400 & that was tearing about a 1" high right tear. Ran out of time due to rain, maybe I'll be able to play with it on Saturday, Might run it out to the Pro shop & see if they have any ideas. I am willing to live with 1/2 tear as long as I can get broad heads to fly.
Thanks for the advise J
Thanks for the advise J