Go Back  HuntingNet.com Forums > Archery Forums > Technical
Beman ICS Hunter quality and accuracy. >

Beman ICS Hunter quality and accuracy.

Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Beman ICS Hunter quality and accuracy.

Thread Tools
 
Old 10-27-2002, 10:20 PM
  #1  
Thread Starter
 
Join Date: Feb 2003
Location: Somewhere ND USA
Posts: 92
Default Beman ICS Hunter quality and accuracy.

I shoot Carbon Express Termintors 45/60 arrows right now which are 11grs/inch and i am looking at the Bemans that are 7.3 grs/inch. i shoot my bow at 50lbs now because of the extra clothes in the cold weather but in the summer i shoot it a 53lbs. I hunt in North Dakota where shots can be long and want a flatter shooting arrow. What do you think about the Bemans??????

Why work when you can hunt???? Heck why work at all!!
The Shooter is offline  
Old 10-28-2002, 08:19 AM
  #2  
Nontypical Buck
 
BGfisher's Avatar
 
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
Default RE: Beman ICS Hunter quality and accuracy.

I've used them for a couple years now. None are perfect. I've used the ICS 400. Am presently shooting ICS 500 for 3D and hunting. at 7.3gr per inch it sounds like that's what you're looking at. They are a decent shaft. Maybe won't be quite as durable as what you're shooting now but should suffice. Just make sure if you get them that when they are cut to length that you get an equal amount cut from both ends. In any of the carbons if they are crooked from the factory it's usually at the ends. Give a half dozen a try. You'll probably like them.
What weight broadhead you shooting? I find that a lot of carbons like lighter heads. If you're shooting 100 then try 75. Shooting vanes? Go to feathers. Between all these you could drop about 75 to 80gr off your arrow. Total would give you about 15 to 20fps gain.


BGfisher is offline  
Old 10-29-2002, 09:47 PM
  #3  
 
Join Date: Feb 2003
Location: Washington State
Posts: 382
Default RE: Beman ICS Hunter quality and accuracy.

I hunt with the black Beman ICS Hunters 340's. Good shafts that are pretty durable. The finish on the plain black arrows is smooth and slick for the most part. I don't think you will be disappointed in their quality if you are looking for a good carbon hunting shaft.

HuntingNet Member since Spring 2001
The Mouse is offline  
Old 10-29-2002, 10:07 PM
  #4  
Nontypical Buck
 
Big Country's Avatar
 
Join Date: Feb 2003
Location: New Stanton PA USA
Posts: 2,213
Default RE: Beman ICS Hunter quality and accuracy.

I have been using the ICS 400`s for 5 years now. I only use them for hunting, and they have performed great for me. I have not tried the 500 series, but would assume they will treat you right.

NRA,UBP,BASS Member
New Stanton,PA
Big Country is offline  
Old 10-30-2002, 04:38 PM
  #5  
 
Join Date: Feb 2003
Location: Cincinnati oh USA
Posts: 626
Default RE: Beman ICS Hunter quality and accuracy.

I have been using the ICS Hunter shaft this year in a size 400. I have had no problems with them at all and find they work really well for hunting. I find they shoot really well and hold up very well for hunting.

I have had no problems with them so that is good!




moonge is offline  
Old 10-31-2002, 03:40 AM
  #6  
Nontypical Buck
 
coolbrze0's Avatar
 
Join Date: Feb 2003
Location: VA
Posts: 1,921
Default RE: Beman ICS Hunter quality and accuracy.

I too use the Beman ICS Hunters in 400 gr. These arrows hold up quite well, but I have had a few vains tear w/ my whisker biscuit rest. Other than that, the ICS Hunters are an awesome arrow.
coolbrze0 is offline  
Old 11-02-2002, 10:49 AM
  #7  
 
Join Date: Feb 2003
Location: Blair Co., PA USA
Posts: 537
Default RE: Beman ICS Hunter quality and accuracy.

I switched from Gold Tip XT's to the ICS Hunter 400's this year and they are now my arrow of choice. I like the quiet finish, and that logo is just awesome <img src=icon_smile_big.gif border=0 align=middle>. I think you'll be pleased with their performance and price tag.

PBB

Pick a hair.....or a caruncle!!
PABeardBuster is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JeffB
Technical
8
04-13-2009 10:00 AM
Elkhntr04
Archery Gear
0
03-09-2007 03:06 PM
firstshot
Guns
38
01-18-2007 12:38 PM
Squirreldog
Technical
14
06-15-2006 07:00 AM
thundermug
Bowhunting
6
06-21-2003 07:32 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Quick Reply: Beman ICS Hunter quality and accuracy.


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.