bowtech defender problem!!!!
09-25-2005 | 05:32 PM
#1
Thread Starter
Fork Horn
Joined: Sep 2004
Posts: 141
Likes: 0
From:
bowtech defender problem!!!!
I have a o5 bowtech defender and I can't seem to get a good paper hole!! I keep getting a right tear with any arrow I tried aluminum 2413 carbon express 45 60 I am shooting a bowtech rest and I even tried a trophy taker I have moved the rest in and out still the same I'm lost!!! the should be in tune as far as string and cable it measures with in a 1/8 in axle to axle.I don't know what to do I have 6 days till opener.
09-25-2005 | 07:39 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 1,398
Likes: 0
From: Eastern PA USA
RE: bowtech defender problem!!!!
Brad:
I would suggest that you e-mail or PM Russ Withrow (Walks with a gimp) about this. I recall a few posts by him concerning the cable routing on the Defender. If you route the cables in a certain way, you can reduce the torque of the bow, and cam lean (if that might be an issue). He had pics up on this site as to how it should look. Maybe you can do a search and find the pics also. Good luck to you.
I would suggest that you e-mail or PM Russ Withrow (Walks with a gimp) about this. I recall a few posts by him concerning the cable routing on the Defender. If you route the cables in a certain way, you can reduce the torque of the bow, and cam lean (if that might be an issue). He had pics up on this site as to how it should look. Maybe you can do a search and find the pics also. Good luck to you.
09-26-2005 | 06:14 PM
#3
Thread Starter
Fork Horn
Joined: Sep 2004
Posts: 141
Likes: 0
From:
RE: bowtech defender problem!!!!
well I think I figured it out my arrows are a little stiff.i can shoot filed tips good but the broadheads are hiting left.I can see it in flight.I'm shooting slick tricks this year.I am going to go to carbon express CX200's I think this will fix it.
