brad patriot

i have a 03 patriot and was having problem getting a good paper tune so I e-mailed pat at bowtech and asked about setting the tiller and rest position.he said use a piece of string axle to axle then measure from the limb pockets,well what I did first was turned both limbs in all the way then backed them off equal turns and checked it with the string axle to axle and it was right on the money.then he said set your rest to 13/16 from the inside of the riser to the center of the shaft,so I did that,then checked my timing mark and it was good.i took a bare shaft 2413 at 29in and a 90gr point and shoot it through paper,perfect hole! went back to about 10 feet again perfect hole,ok cool!!!! so I took a fletched arrow got it sighted in at 20yds,arrow flew great.so I thought ok now heres the test i tooka 90gr 4 blade muzzy and shot that,i put it right next to the field point.what luck i guess.now i think i will do some 30 and 40yd shots tommorrow.

JeramyK

Glad to hear you were able to iron out the wrinkles. I too have an 03' Pat and I will say that once they are dialed in they are one sweet shooter.

TerryM

I also shoot an 03 Patriot and right now see no reason to plunk down hundreds of dollars for the small improvement I would gain from a newer one. Great bows !

JeffB

Pat is good people!

Pain in the @$$ at times..but good people nonetheless

BowTech_Shooter

Thanks Jeff, I appreciate the compliment.[8D]




Brad,

I'm glad to hear things are working out for you.

JeffB

yeesh..givesomeone acompliment and see what I get?

I take it back....

Pat is a big buttmunch....

doesn't know crap about bows...

it *WAS* just luck....

BowTech_Shooter

My my my, what the heck did I say to yank your chain Jeff...[8D]Need a nap?



P.S. too bad you didn't quote me huh?

JeffB

SEE WHAT I MEAN???

PAIN
IN
THE
@$$

brad patriot

pat didn't realize you where a member on here.thanks