a little help
07-09-2005 | 05:57 PM
#1
Thread Starter
Joined: Mar 2003
Posts: 282
Likes: 0
From:
a little help
Ok I put the whiskers on my bowstring and it still seems loud with some vibration. I had the saunders buzz off installed on my bow which is like theSTS but the cushion part broke on in so i had to take it off . I'm shooting Easton ACC 3-60 w/ a 70 lb draw weight.
07-09-2005 | 09:36 PM
#2
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: a little help
Well, you could try a couple things. One, you can reposition the string silencers until you find a "sweet spot" where they work better than any other place. You could also try different string silencers like leeches, etc... and or you could try installing more silencers on the bowstring.
On the other end of the spectrum you could also try using a heavier arrow weight as the arrow will absorb more energy during the release thus resulting in less being imparted into the bow.
Lastly, if you haven't already done so then limbsavers and a good stabilizer should be able to help in the noise and vibration category but not necessarily much with the string twang.
On the other end of the spectrum you could also try using a heavier arrow weight as the arrow will absorb more energy during the release thus resulting in less being imparted into the bow.
Lastly, if you haven't already done so then limbsavers and a good stabilizer should be able to help in the noise and vibration category but not necessarily much with the string twang.
