brace height adj?bowtech patriot
07-09-2005 | 08:23 AM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 2,599
Likes: 0
From: Crosby TX USA
RE: brace height adj?bowtech patriot
Sounds like you have the dual cam?
If it's the solocam (older model maybe?)the B/H can easily be moved back and forth depending on the cam timing. Make sure your cam is on the tuning marks and the B/H should be real close as long as the ATA is correct.
If it's the solocam (older model maybe?)the B/H can easily be moved back and forth depending on the cam timing. Make sure your cam is on the tuning marks and the B/H should be real close as long as the ATA is correct.
07-09-2005 | 09:28 AM
#3
Nontypical Buck
Joined: May 2004
Posts: 4,679
Likes: 0
From: Albany, NY
RE: brace height adj?bowtech patriot
I believe there was a misprint in one of the original owners manuals for the Patriot w/ incorrect brace height for the patriot. It is really supposed to be 7" even. Check the tuning marks, that is the best indication and the most important thing to watch in my opinion.
