HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   30.06 moose load any suggestions? (https://www.huntingnet.com/forum/reloading/56202-30-06-moose-load-any-suggestions.html)

Pace Maker 03-17-2004 06:53 PM

30.06 moose load any suggestions?
 
Hello! I have a moose hunt in Newfoundland coming up in September. I was wondering if anyone had any suggestions on a load. The outfitter says shots in the 75-200 yard range are most common. Thanks for any replies..........John

Vapodog 03-18-2004 05:08 AM

RE: 30.06 moose load any suggestions?
 
I'd use the Nosler accubond 200 grain or the 200 grain Swift a-frame.

You should come close to 2800'/sec working up a load with RL22 or IMR7828 in a 22" barrel.

akbound 03-18-2004 05:45 AM

RE: 30.06 moose load any suggestions?
 
Hi Pace Maker,

You'd have trouble finding better bullets than Vapodog suggested. If you should run into difficulty finding either of those 200 grain Nosler Partitions will do anything on Moose, needing done. Work the load that shoots best in your particular rifle.....but don't compromise on the bullet.

Good luck on your hunt.

Dave

rkbo 03-18-2004 05:50 AM

RE: 30.06 moose load any suggestions?
 
I will add just this: It depends on your rifle. That is, if you have a rem. semi auto it will jam sometimes on bullets bigger than 190gr or smaller than 150gr.

Pace Maker 03-18-2004 05:59 AM

RE: 30.06 moose load any suggestions?
 
I'm sorry.........I left out what kind of .06 it was. It's a model 700 bolt. Thanks for the replies, looking forward to this hunt and figured if I could get any info on a load it'd help. I figured this was the place to ask.....John

noway 03-18-2004 10:18 AM

RE: 30.06 moose load any suggestions?
 
180 Barnes Triple Shock would be a great bullet for moose. People have had great luck with accuracy with them as well.
The previous bullets mentioned are all excellent choices as well.

Think penetration! On an animal that big at those yardages, accuracy is not your main concern.

Rick Teal 03-18-2004 10:47 AM

RE: 30.06 moose load any suggestions?
 
My last two bulls (both in the 1,200 lb range) were killed with 180 grain ballistic tips on top of 48.5 grains of IMR 4320. Both were quick/clean kills. The longest shot was about 70 yds.

bigcountry 03-18-2004 11:58 AM

RE: 30.06 moose load any suggestions?
 
180gr Nosler Partition or any barnes would be the trick for moose. You still want that thing to be plenty flat. 180gr would be my limit.

eldeguello 03-18-2004 01:58 PM

RE: 30.06 moose load any suggestions?
 

ORIGINAL: Vapodog
I'd use the Nosler accubond 200 grain or the 200 grain Swift a-frame.
You should come close to 2800'/sec working up a load with RL22 or IMR7828 in a 22" barrel.
I agree 100% with this choice!!

A 200-grain @ 2800 is treading right on the heels of the .300 Win. mag.!!

bigcountry 03-18-2004 02:00 PM

RE: 30.06 moose load any suggestions?
 
Ok, guys, I have killed moose with 180gr, and 165gr. I didn't get a pass thru with either and both was over 200 yards. Why do I need a 200gr bullet out of a 30-06?


All times are GMT -8. The time now is 09:25 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.