.308 reloading remington 700 ss 5r
#1
Thread Starter
Join Date: Feb 2009
Posts: 3
.308 reloading remington 700 ss 5r
Does any one have loading experience with this gun?
24" barrell 11-1/4" twist.
factory 168 amax hornady match 3/8" or better out of the box.
have lapua brass wlr primers and 168 combined tec bullets.
winchester 748 powder.
gun has been accurized by ga precision.
24" barrell 11-1/4" twist.
factory 168 amax hornady match 3/8" or better out of the box.
have lapua brass wlr primers and 168 combined tec bullets.
winchester 748 powder.
gun has been accurized by ga precision.
#2
Spike
Join Date: Feb 2009
Location: North Pole, Alaska
Posts: 71
RE: .308 reloading remington 700 ss 5r
You have a very good start with good componets like Lapua Brass.
May need a little work on the other stuff.
I prefer Match grade primers like Fed 210 Match or CCI Br2.
Powders prefer IMR 4895 or Reloader 15 with Fed 210 Match primers......Varget is also good with BR2 primers.
Excellent bullet the 168 BST.
with Varget @ 46.0
IMR 4895 @ 43.6 (Very Accurate) with FC 210 Match Primers (dupilcates Fed Gold Medal Match Load if you use FC brass and 168 Sierra MK bullet)
IMR 4064 @ 43.5 same as above
May need a little work on the other stuff.
I prefer Match grade primers like Fed 210 Match or CCI Br2.
Powders prefer IMR 4895 or Reloader 15 with Fed 210 Match primers......Varget is also good with BR2 primers.
Excellent bullet the 168 BST.
with Varget @ 46.0
IMR 4895 @ 43.6 (Very Accurate) with FC 210 Match Primers (dupilcates Fed Gold Medal Match Load if you use FC brass and 168 Sierra MK bullet)
IMR 4064 @ 43.5 same as above
Thread
Thread Starter
Forum
Replies
Last Post
Stone Cold
Reloading
8
03-30-2004 07:34 AM