HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   204 ruger reloads (https://www.huntingnet.com/forum/reloading/280015-204-ruger-reloads.html)

chuckell 12-28-2008 02:47 PM

RE: 204 ruger reloads
 
bigcountry bull barrel-22"twist 1-10, hammer gun single shot,did already load some loads was just looking for diff. loads,not realy alot of load info i found yet for this babby,thanks again,chuckell,

chuckell 12-28-2008 02:51 PM

RE: 204 ruger reloads
 
remember i only asked for load info,not a lecture,

Pawildman 12-28-2008 10:32 PM

RE: 204 ruger reloads
 
............Not to seem condescending, have you consulted several reloading manuals for info? That's usually a good place to start.........

chuckell 12-30-2008 07:22 AM

RE: 204 ruger reloads
 
who sells a reload manual with 204 cal. in it ,i haven't found any yet,let me know?

bigcountry 12-30-2008 09:31 AM

RE: 204 ruger reloads
 
i have been following the hodgdon recommendations. But I have seen some loads in handloader magazine. Noslers 6th edition has 204 loads. Websites like www.handloader.com has a bunch.

Pawildman 12-30-2008 09:45 AM

RE: 204 ruger reloads
 

ORIGINAL: bigcountry

i have been following the hodgdon recommendations. But I have seen some loads in handloader magazine. Noslers 6th edition has 204 loads. Websites like www.handloader.com has a bunch.

........Yep, and 7th edition Hornaday also.......

Mr. Slim 01-02-2009 10:12 AM

RE: 204 ruger reloads
 
chuckell, never said i knew it all. just giving you some information you asked for. i helped my brother in law work up a load for his 204 and this is how we did it. ive been loading for about 25 years and learned from one of the best guys in my area. sorry if thats how i came across to you.

chuckell 01-02-2009 12:04 PM

RE: 204 ruger reloads
 
mr. slim, comment wasn't for you ,it was for howler,sorry

chuckell 01-02-2009 12:06 PM

RE: 204 ruger reloads
 
was only lokking for starting point,and components,maybe better to not ask anymore,sorry guys,

Pawildman 01-02-2009 02:24 PM

RE: 204 ruger reloads
 

ORIGINAL: chuckell

was only lokking for starting point,and components,maybe better to not ask anymore,sorry guys,
chuckell......I don't feel anyone on here meant to offend you in any way. We know nothing about your level of experience with reloading, and were only trying to make sure that safe practices were used. Perhaps if you could have given us a little more info on your backround with reloading, we could have been a little more helpful. Nobody here is going to lecture you about anything. Only have your best interest at heart, really. This is a great place to gather information, and have a good time. Lots of very knowledgeable people on here. Hope you choose to stick around................PA.


All times are GMT -8. The time now is 02:45 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.