Just wondering what velocities you guys are getting with the 110 Accubonds out of your 06's. I've been shooting the 100gr XLC's @ 3450fps out of my 26" Encore but accuracy wasn't there so it's time for a switch. I've always had great accuracy with the Accubonds in my other guns, I just hope I can get um to shoot fast enough for the 300yrd zero I like on all my speedgoat/muley guns. I hope I can find a load other then R22 because I found it to be very temp sensitive, but I'll take what I can get. Thanks for any info. Brett

Wow, no one?

I used the 110 for deer last year.Tried to find my notes for them but couldn't.they were really accurate in my tikka.I used 53.5 grs. of R-22 tho.I remember posting the speeds on here but don't remember where.

"I just hope I can get um to shoot fast enough for the 300yrd zero".You lost me there??

herman- If I can only get um goin 3100-3150fps that would be quite a rainbow out to 300yds is all I mean.

try working a load from the serria book. they dont list the 110 but try the same load for the 115. should work really well.

Nosler has the data on their website, 3100-3150 is plenty flat buddy...But you can get more
25-06 Rem
110 gr AccuBond®
Ballistic Coefficient: .418
Sectional Density: .238




* Most Accurate Load Tested




Powder: MagPro

Charge Weight (in grains)
Muzzle Velocity (fps)
Load Density

56.0

3212 fps
91%

54.0

3129 fps
88%

52.0*

3035 fps
85%


Powder: Retumbo

Charge Weight (in grains)
Muzzle Velocity (fps)
Load Density

59.0*

3267 fps
98%

57.0

3206 fps
95%

55.0

3121 fps
91%


Powder: IMR4350

Charge Weight (in grains)
Muzzle Velocity (fps)
Load Density

49.5

3183 fps
83%

47.5*

3092 fps
79%

45.5

2955 fps
76%[/align]