Anyone reload for Shotgun?
#11
Nontypical Buck
Join Date: Aug 2004
Location:
Posts: 1,675
RE: Anyone reload for Shotgun?
ORIGINAL: NE Hunter
I have the Mec 650 too. I haven't loaded shot shell in years as I can get factory foder that serves my purpose cheap enough that it isn't worth the time and trouble. If you go for the 650 you'll need the size master too s the 650 doesn't resize the shell ( something I had to learn the hard way) the 850 grabber does resize the shell. Mec makes great products.
I have the Mec 650 too. I haven't loaded shot shell in years as I can get factory foder that serves my purpose cheap enough that it isn't worth the time and trouble. If you go for the 650 you'll need the size master too s the 650 doesn't resize the shell ( something I had to learn the hard way) the 850 grabber does resize the shell. Mec makes great products.
The only time I needed to size them was when I used empties that were not fired in my gun
#14
Nontypical Buck
Join Date: Aug 2005
Location: S.W. Pa.-- Heart in North Central Pa. mountains-
Posts: 2,600
RE: Anyone reload for Shotgun?
Ditto, Hairtrigger----- You only need to size shells that weren't fired in your gun, and then only if they won't go in your gun to begin with. I loaded many thousands of once-fired AA hulls back when I was shooting a lot that had been fired in other guns, and can't remember more than a few occasions of having a tight shell casing. They were all loaded on my old 650 MEC.
A chamber on the large side of tolerances may require shells be resized to fit your particular gun.
A chamber on the large side of tolerances may require shells be resized to fit your particular gun.
#16
Boone & Crockett
Join Date: Feb 2003
Location: Ponce de Leon Florida USA
Posts: 10,079
RE: Anyone reload for Shotgun?
fastfire, I was just about to order a new reloading kit for shotshells, but you post that the savings would only be three penniesper boxthrows a bucket of water on my powder. Is that actually the only savings? We just put in a six position trap range and a complete sporting clay range and thought these thousands of hulls I have needed a place to be reloaded...........
#17
Join Date: Feb 2003
Location: Western up state NY in the USA
Posts: 259
RE: Anyone reload for Shotgun?
ORIGINAL: timbercruiser
fastfire, I was just about to order a new reloading kit for shotshells, but you post that the savings would only be three penniesper boxthrows a bucket of water on my powder. Is that actually the only savings? We just put in a six position trap range and a complete sporting clay range and thought these thousands of hulls I have needed a place to be reloaded...........
fastfire, I was just about to order a new reloading kit for shotshells, but you post that the savings would only be three penniesper boxthrows a bucket of water on my powder. Is that actually the only savings? We just put in a six position trap range and a complete sporting clay range and thought these thousands of hulls I have needed a place to be reloaded...........
Hulls - free
powder $18.00 per lb- 30gr =$1.94
shot -$24.00 per 25lb -1 1/8 oz $1.70
primers-$20.00 per 1000 = $.50
wads - $24.00 per 1000 = $.60
total $4.74
You might find better prices but this is the cost in my area for small amounts.
+ the cost of press & powder scales + your time.
Walmart same basic load $3.99 a box by the case
and I have found even cheaper deals.
If you buy in large quantities cost goes down.
But you have to be able to store it.
500 lb of shot takes up a lot of space.
large cans of powder you have to store properly & so on.
If you are a club or something similar check around.
A few of the Rod & Gun Clubs in the area went together & buy factory ammo at $2.50 to 3.00 per 25 rounds they
sell to us at a $.25 mark up.
This is my $ .02
#18
Nontypical Buck
Join Date: Aug 2004
Location:
Posts: 1,675
RE: Anyone reload for Shotgun?
Fastfire
I would say you are paying too much for powder , wads, and shot
I just paid $102 for 8 lbs of Clays powder, $16.75 for a bag of hard shot
However
If you are shooting for fun and happy with the cheep 100 packs of shells at wally world reloading is not for you unless you need a hobby to keep yourself off the streets!!
I would say you are paying too much for powder , wads, and shot
I just paid $102 for 8 lbs of Clays powder, $16.75 for a bag of hard shot
However
If you are shooting for fun and happy with the cheep 100 packs of shells at wally world reloading is not for you unless you need a hobby to keep yourself off the streets!!
#19
Join Date: Feb 2003
Location: Western up state NY in the USA
Posts: 259
RE: Anyone reload for Shotgun?
ORIGINAL: Hairtrigger
Fastfire
I would say you are paying too much for powder , wads, and shot
I just paid $102 for 8 lbs of Clays powder, $16.75 for a bag of hard shot
However
If you are shooting for fun and happy with the cheep 100 packs of shells at wally world reloading is not for you unless you need a hobby to keep yourself off the streets!!
Fastfire
I would say you are paying too much for powder , wads, and shot
I just paid $102 for 8 lbs of Clays powder, $16.75 for a bag of hard shot
However
If you are shooting for fun and happy with the cheep 100 packs of shells at wally world reloading is not for you unless you need a hobby to keep yourself off the streets!!
I stated 2 things & you can not read!!!!!
1. cost in my area!!!!!!!!!!!!
2. Cost is less when you buy in bulk.
You need somthing to keep you off the streets
try school AND
LEARN to READ before you start slaming.
#20
Join Date: Mar 2006
Posts: 115
RE: Anyone reload for Shotgun?
http://www.trapshooters.com/reloadcalc.htm
The above link will help you figure out exactly what your reloading costs/box are for shot shells...
I buy components in bulk and my loads are costing right around 3bucks a box depending on what is in them, I just bought 3 flats of pretty decent shells for $3.50/box including tax...I'm still using my hand loads for serious shoots but I'm trying out the store-bought ones and they work good.
Doug
The above link will help you figure out exactly what your reloading costs/box are for shot shells...
I buy components in bulk and my loads are costing right around 3bucks a box depending on what is in them, I just bought 3 flats of pretty decent shells for $3.50/box including tax...I'm still using my hand loads for serious shoots but I'm trying out the store-bought ones and they work good.
Doug