monarchoutdoors

I was wondering of anyone has any loading data for the Barnes Triple Shock in the .257 Weatherby Mag. Thanks in Advance

Gundigest

The barnes web site gives the directions for loading the triple shocks. www.barnesbullets.com

monarchoutdoors

Thank You but I have been reloading Barnes for awhile use thier manual often. I also have contacted thier techs by phone. I was looking for a load than someone else has developed to be a tack driver and to see if they are willing to share it. Thanks again

vangunsmith

You might want to try out www.loaddata.com its a real good sight. vangunsmith

bigcountry

From my barnes manual with 100 and 115 XFP and XBT. They say you can go another 1 or 2 grains over this data safely. I have confirmed this with my 300RUM. But thats alot of more powder, and I would be much more careful watching for pressure signes with this load since 1 or 2 grains percentage wise is much more..

100gr
RL19 64-69gr
RL22 67-72gr (recommended powder)
H4350 57-62gr
H4831 63-68gr
H1000 71-76gr (recommended powder)
IMR4831 61-66gr
IMR7828 65-70

115gr
AA3100 61-66gr
RL22 64-69gr (recommended powder)

H4831 61-66gr
H1000 68-73gr
IMR4831 59-54gr
IMR7828 63-68gr

monarchoutdoors

Thanks again for the in put. I have to say that I like the stocks on the SuB Moa in the tan with black web. I have found a good load. 64 gr H4831 Fed 215m
all touching at 100 yards with 100 gr scirocco or ballistic tips. Thanks again any more is appreciated