Concept Archery Bows
#3
Fork Horn
Join Date: Feb 2003
Location: ashland ohio USA
Posts: 150
RE: Concept Archery Bows
bottom cam has a half axle?
seems to me that if you shoot your bow alot the axle would come loose?
steel axle in a aluminum cam?
limb flex?
axles falling out after the axle gets loose in the cam?
seems to me that if you shoot your bow alot the axle would come loose?
steel axle in a aluminum cam?
limb flex?
axles falling out after the axle gets loose in the cam?
#5
Join Date: Aug 2003
Posts: 4
RE: Concept Archery Bows
That was a pretty neat trick to draw the bow back and let it hang there at full draw. I wouldn' t ave believed it if I hadn' t seen it. I shot the bow but couldn' t tell all that much about it since the DL was 2" to long. You could hold it forever. To let it down felt almost like you had to push the string forward. I liked the idea of the all one piece riser with the limb pockets being machined in the riser itself. They told me by next year the 2 cam they have will be 99% let-off. I' ll let one of my buddies get one first to try. The UltraTec is doing a good job for me right now.