Ky Turkey Hunter91

how much do i need to tighten the front wheel bearings on a honda 450 forman,it is 4 wheel drive.


thanks

stalkingbear

I think they would be like any other bearing of the same type/use/model and simply run down slightly snug without overtightening as this will cause premature failure.

BungalowBizz

That's the approach I would take.

CamoCop

tighten till snug then back it off 1/4 to 1/2 a turn. if you leave it snug, it will get hot and weld to the axle.