Info on the Ruger #1
#21
RE: Info on the Ruger #1
Here's a 7X57mm 100 yard group with a Ruger No. 1A, Liberty Model.
Load: 140 grain Nosler Partition, 53 grains of WW 760, Norma case, Fed. 210 primer o/a loaded length, 82mm. MV, 3000 FPS
Aiming point, a 1" GI black target paster.
Load: 140 grain Nosler Partition, 53 grains of WW 760, Norma case, Fed. 210 primer o/a loaded length, 82mm. MV, 3000 FPS
Aiming point, a 1" GI black target paster.
#22
RE: Info on the Ruger #1
And this here group was shot at 100 yards with my Ruger No. 3 in .30/40 Krag.....
The load was a 170-grain Hornady .30/30 flatnose with 50 grains of IMR 4350, MV 2500 FPS, R-P cases, Fed. 210 primers.
The load was a 170-grain Hornady .30/30 flatnose with 50 grains of IMR 4350, MV 2500 FPS, R-P cases, Fed. 210 primers.
#23
RE: Info on the Ruger #1
Yes, the Ruger single-shots are inaccurate pieces of crap, as you can see. If this program would permit more than one 30 K file per reply, I have tons of others, from .25/'06's through 375 H&H to .45/70, every one of which is equally disgusting......
#24
Nontypical Buck
Thread Starter
Join Date: Feb 2003
Location: MB.
Posts: 2,984
RE: Info on the Ruger #1
Well ended up getting a 22-250 Ruger #1-B. Happen to come across a guy that was selling this rifle for a good price. It wasn’t the caliber I was looking for but the price was write. I had the dies for reloading so I couldn’t pass up the opportunity. Now all I need is a good scope and I’m off to the range.Thanks again for all the info....