I.D. an old 8 mm,for me .
#1
Thread Starter
Typical Buck
Joined: Feb 2003
Posts: 743
Likes: 1
From: North East PA. but not home.
On top of the reciever ,stamped " 1937 " . On left side of reciever" cecsloveska bronjovka,A,S,BRNO.And under this is,VZ 24.
I know little on Mausers ! Is this a Large or small ,ring Mauser ?
I have a 98,large ring,the reciever is messed up,and would like to put the barrel onto this one. Will it fit ????????????
I know little on Mausers ! Is this a Large or small ,ring Mauser ?
I have a 98,large ring,the reciever is messed up,and would like to put the barrel onto this one. Will it fit ????????????
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Western Nebraska
you have a large ring Mauser.....and the barrel will fit if you take it to a smith that knows how to " fit" it...
Your 1937 BRNO is a fine action.....why not start there and build a truly fine custom gun.....
Your 1937 BRNO is a fine action.....why not start there and build a truly fine custom gun.....
#3
Typical Buck
Joined: Feb 2003
Posts: 612
Likes: 0
From: Eagles Landing, KS
It' s a VZ 24 large ring. They are good rifles.
As for the barrel interchange. ??????
Some large ring receivers take small ring shank and threads.
Check parallax.com
Then go to curio' s and relics , it' s a forum like this and there is tons of info to be had for the asking.
Good luck
As for the barrel interchange. ??????
Some large ring receivers take small ring shank and threads.
Check parallax.com
Then go to curio' s and relics , it' s a forum like this and there is tons of info to be had for the asking.
Good luck
#5
VZ-24. Its a large ring mauser 98 that uses a large ring barrel. Almost all Czech made rifles you will find are large ring, except the G33/40 mountain carbine which is pretty rare and has a distinctive looking buttplate.
milsurpshooter.net will get you to the Parallex website.
milsurpshooter.net will get you to the Parallex website.



