synthetic stocks
#2
RE: synthetic stocks
Some synthetic stocks have a hollow cavity in the buttstock behind the recoil pad into which you could insert one of the mercury recoil reducers (most of which weigh between 1/2 to 1lb.) marketed for shotguns. Or you could fill it with your desired amount of lead shot and then fill the empty space with some of that expanding foam spray insulation. I've also seen synth stocks that have hollow space in the fore end which could also be filled with lead shot and epoxy. Why do you want to add weight?
Mike
Mike
#5
RE: synthetic stocks
Well I don't have any shot laying around but I do have a bunch of lead fishing weights and so rags to wrap them in to keep them from rattling, Do you think this will help with the kick? I also have a 06 with a solid wood stock and I don't belive it kicks near as hard.
#6
RE: synthetic stocks
Sure, you could use the sinkers. I'd probably use something other than rags to hold them in place and prevent rattling. I suggested the expanding foam insulation because it will completely fill the void space and hardens very firm, but will allow the overflow to be neatly trimmed to make a very clean job. Once the recoil pad were reinstalled you won't ever know it was done, and won't have to worry about the sinkers or shot coming loose sometime later forcing you to redo the job later.
Mike
Mike
#7
Join Date: Nov 2008
Posts: 42
RE: synthetic stocks
Does it have one of the newer R3 recoil pads? Those do very well in keeping recoil down. Otherwise yeah some weight in the buttstock, however you get it there, will help with the recoil and balance. Beyond that, Mag-na-Port is a reliable choice without being so obnoxious as most muzzle breaks.
#8
RE: synthetic stocks
I'd add the weight first, which will certainly decrease recoil proportionally to the amount of weight added. As for having the barrel Magna Ported, that would be my last choice. Not only will it significantly increase the muzzleblast, but it also effectively shortens the barrel to where the first port is located, which will cause you to lose muzzle velocity. If adding 1/2 to 1lb of weight still doesn't make the recoil tolerable, I'd consider buying a rifle chambered in a lighter recoiling cartridge. Some people are just more recoil sensitive than others, and the .30-06 might be a little too much for him.
Mike
Mike
#10
RE: synthetic stocks
In addition to the excellent suggestion of using your sinkers with foam insulation,I'd DEFINITELY get a sims limbsaver recoil pad. Another thing which will reduce recoil is lighter weight bullet loads such as 150 gr bullets instead of 180s. Both remington and federal offer reduced recoil loadings for your rifle and are plenty deadly at ranges within 200 yards-they will reduce recoil by about 1/2-about like a .243.