Chamber Rust
11-02-2007 | 12:32 PM
#1
Thread Starter
Joined: Nov 2007
Posts: 6
Likes: 0
From:
Chamber Rust
Howdy y'all, first off, I'm new here, and somewhat new to the whole rifle scene itself.
Anyway, I just purchased a 1944 Enfield No.4 Mk1* from Long Branch with some chamber rust in it, and I was just curious to see if anyone could help me out with removing it, if it's possible? I've tried googling but nothing really came up, sadly.
Anyway, thanks for your time guys! Much appreciated!
Anyway, I just purchased a 1944 Enfield No.4 Mk1* from Long Branch with some chamber rust in it, and I was just curious to see if anyone could help me out with removing it, if it's possible? I've tried googling but nothing really came up, sadly.
Anyway, thanks for your time guys! Much appreciated!
11-02-2007 | 03:21 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,802
Likes: 0
From: Coralville, IA. USA
RE: Chamber Rust
First of all, welcome to the board. You'll find a lot of good information here. Feel free to ask all the questions you like, and someone will certainly try to help you.
See if you can find a brass or phosphor bronze (NOT stainless steel!!) chamber brush for (I'd assume) the .303 British or similar (.30-06 should work). Put if on a short cleaning rod and chuck it up on a variable speed drill. Put some Break-Free CLP on the brush (get it good and wet), insert into chamber, and scour the chamber on low speed working the chamber brush back and forth. Swab with a patch to get the rusty/dirty CLP out and repeat until the patches come out rust free. Clean the chamber/bore until it is as dry as you can get it, and then inspect it to see if you can see any obvious deep pitting. If you can, I'd take it to a gunsmith to see what he thinks after looking at it with a borescope. If the chamber appears smooth, it should be fine to shoot.
However, for safety's sake with an old battle rifle like that, I'd consider taking it to a 'smith before I'd shoot it anyway. Some of those old rifles are still as rugged as the day they were made, but many have been beaten and abused in general military service for years and may not be in servicable condition as is now. Only a gunsmith can really make that call after a thorough inspection.
Good luck,
Mike
See if you can find a brass or phosphor bronze (NOT stainless steel!!) chamber brush for (I'd assume) the .303 British or similar (.30-06 should work). Put if on a short cleaning rod and chuck it up on a variable speed drill. Put some Break-Free CLP on the brush (get it good and wet), insert into chamber, and scour the chamber on low speed working the chamber brush back and forth. Swab with a patch to get the rusty/dirty CLP out and repeat until the patches come out rust free. Clean the chamber/bore until it is as dry as you can get it, and then inspect it to see if you can see any obvious deep pitting. If you can, I'd take it to a gunsmith to see what he thinks after looking at it with a borescope. If the chamber appears smooth, it should be fine to shoot.
However, for safety's sake with an old battle rifle like that, I'd consider taking it to a 'smith before I'd shoot it anyway. Some of those old rifles are still as rugged as the day they were made, but many have been beaten and abused in general military service for years and may not be in servicable condition as is now. Only a gunsmith can really make that call after a thorough inspection.
Good luck,
Mike
11-02-2007 | 07:55 PM
#3
Nontypical Buck
Joined: Aug 2005
Posts: 2,600
Likes: 0
From: S.W. Pa.-- Heart in North Central Pa. mountains-
RE: Chamber Rust
Listen to what driftrider said. He gave pretty good advise. If the chamber has heavy rust, you may not be able to save it. A light coat may be able to be cleaned up, but in any case, do a reasonable cleaning, and please take it to a good gunsmith for a professionable opinion. Not only is the case body area involved, but the neck area too, and most likely the bore. You need to have the bolt examined as well.
