Help cleaning a Remington 742
02-15-2007 | 05:44 PM
#1
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 3,116
Likes: 0
From: VA, USA
Help cleaning a Remington 742
Need some tips on cleaning the Remington 742. This was my dad's rifle and has been passed to me since his passing a few years ago. I have loosened the forearm screw and slid the forearm forward just a little bit. Things looked kind of dry in there. After I clean it real good I may take it on a few hunts and take a deer with it or it may become a "safe queen." Any tips or suggestions would be appreciated.
02-15-2007 | 06:33 PM
#2
Joined: Aug 2006
Posts: 299
Likes: 0
From:
RE: Help cleaning a Remington 742
Ridge is right.
You may have to use a brass punch and hammer to get the barrel nut loose. Also, grinding down the sides of an open end wrench(don't remember size)to fit between the op rod's/railshelps
You may have to use a brass punch and hammer to get the barrel nut loose. Also, grinding down the sides of an open end wrench(don't remember size)to fit between the op rod's/railshelps
