HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   best grain for accuracy (https://www.huntingnet.com/forum/guns/179976-best-grain-accuracy.html)

.:SCOPE:EYE:. 02-11-2007 09:35 AM

RE: best grain for accuracy
 
thats all .308 what is the best for 06....i looked and they did not carry 06 springfield....in SIERRA brands

.:SCOPE:EYE:. 02-11-2007 09:37 AM

RE: best grain for accuracy
 
im a nebe for online gun stuff....is /CS boxes per case??

skeeter 7MM 02-11-2007 11:28 AM

RE: best grain for accuracy
 

ORIGINAL: .:SCOPE:EYE:.

thats all .308 what is the best for 06....i looked and they did not carry 06 springfield....in SIERRA brands
Take it you are not a reloader??? These are bullets only, the .308 is the diameter of bullet the 3006 uses.

Federal loads the 168gr seirra matchking for the 06'.

.:SCOPE:EYE:. 02-11-2007 11:33 AM

RE: best grain for accuracy
 
o0o0 that would explain why thier so cheap....GOT YA ...mark me down for one F-UP

.:SCOPE:EYE:. 02-11-2007 11:34 AM

RE: best grain for accuracy
 
but the site caried full load.....i went to the site to double check there are full load spr. for $20 for 200 rounds???? am i 0-2 or am i right anyone wanna double check that

.:SCOPE:EYE:. 02-11-2007 11:36 AM

RE: best grain for accuracy
 
look am i crazy ??? http://www.grafs.com/fc/browse.php?q=&v=410&s=az&p=222

skeeter 7MM 02-11-2007 11:41 AM

RE: best grain for accuracy
 
http://www.grafs.com/fc/browse.php?q=&v=320&s=az&p=222

First item- 168 seirra matchking loaded by federal $27.99

Not crazy just weren't looking in the right spot:D

.:SCOPE:EYE:. 02-11-2007 11:51 AM

RE: best grain for accuracy
 
not u got me CRAZY!!!!! im looking for the whole round casing and all.....(btw we ae on the same link i just limeted to one brand)

will79 02-11-2007 02:56 PM

RE: best grain for accuracy
 
It depends a lot on what your gun likes. The standard twist for the 30-06 is 1 in 10", but he Browning B78 and Husquvarna barrels are 1 in 12" twist. I have a B78 30-06 that can put 3 shots in 3" at 300yds using factory winchester 150gr ballisticsivertips. It's just a hunting rifle so I haven't tried it any further than that. I wouldn't say that's very good for long range "sniping", but plenty good for hunting. My wife has a custom 30-06 on a mauser 98 action that will put my handloads using 150gr B-Tips and 50.5gr of Ramshot TAC into one ragged hole at 100yds. Haven't tried it at longer range yet. Not sure what the twist is on this one either.

skeeter 7MM 02-11-2007 05:54 PM

RE: best grain for accuracy
 

ORIGINAL: .:SCOPE:EYE:.

not u got me CRAZY!!!!! im looking for the whole round casing and all.....(btw we ae on the same link i just limeted to one brand)
I used your link to see if they had federal, which they did and thenI pasted it for you in my reply. These are loaded 3006 cartridges with the 168gr Seirra Matchking bullet (top of the page when the link opens up - no image available). If your still confused here is a link to federal cartridge:http://www.federalcartridge.com/ballistics/Ammo_Search.aspx?act=choose&firearm=1&s1=1


All times are GMT -8. The time now is 05:05 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.