We talk about liking the use of heavier slug barrels
in using our slow powder giving 1/3 faster loads
in plastic cases, and handling recoil better. It is
stiffer being heavy for an aid to accuracy.
Guy out west has this heavy muzzled, Hastings, rifled
barrel, for his REM 870. In first pic is a comparison to the
original 870 barrel. It shows a muzzle as heavy as on
a NEF Ultra Slug GUN. 2nd picture is the gun itself.
That makes a neat slug gun..Ed

Do you phucks have anything else to play with? if you took all the money you wasted, you could own a real gun by now....

It is not wasted, we are having a great fun and great shooting.Ed

The heavy rifled barrel in previous post was made by
Hastings for the Remington 870. It is 26" long and a
muzzle diameter of over an inch. Hastings is gone now,
but we'd like to find some of these barrels. The Hastings
number of the barrel is 560H90.

In the meantime Remington has come out with their
SPS Super Magnum Slug Gun with 25.5" rifled barrel and
a 1" diameter muzzle, with more solid barrel, and extra
pins in mounting barrel, so a scope can be put on action. Ed

I am now putting a 3.5" 20ga on the FBW action.
We are having RMC make 3.5" brass 20ga cases. I also
bought a huge box of 3.5" plastic case Hastings
hot rod sabot slugs at their out if business auction.
Picture is of FBW with brass case in the feed trough.
Any wanting to do 20 ga brass cases, at same time,
contact RMC, they'd like to make a big batch this spring..
I also got few of the cases to make the 10ga FH
brass 4.050" long case. Anyone wanting one. I'll part
with them, but I'll only will have a few. The brass is hard
to find and costly.. Ed

I get asked about presses used for big cases.
Here is a picture of my 2 big presses on
the heavy bench, with the case spinner/lathe
on the back of the bench. Blue one is a Walnut
Hill and the green is beefed up Ammomaster.
Both are braced so I can lean on them.Bench is
braced to wall supports and benches behind.

You can see the expanders laid out on the press
brace arms, and a whole bunch of shorty dies laid
out, that fit everything from 10ga down to
my 700HE. And variety of large cases and real large
4ga-8ga dies, parts I work with. On the right is a
stack of my 585HE dies in the die boxes.Ed

Now might get real exciting load developement wise,
If we could make brass cases as long as the paper
one on the right. In picture is 3.5" 10ga plastic
case, our 10GA FH brass 4.05" case I made by putting
a 10ga basecup on 50cal Russian brass, and third
a 6" long 10ga bomb disposal case used to shoot
liquid/gel in to bomb packages, I think.
Anyone knows for sure let me know.ED

Here is picture showing surplus 50 Russian case before
and the 10ga brass case we make using it with
10ga bases pressed and epoxied on and expanding
case out straight, making the 4.050" long
10ga case.ED

We have put 4 different cartridges in the Savage 210
bolt gun. We added various 12ga and .700"
heavy thick barrels.
The first was our 12ga FH long case.
The second was my 700H 3.25" belted case.
Third was the 3.5" 12ga that Bret did, and
fourth is the 700NE that we wanted to see
how it works. It shoots fine, has weighted stock,
and a 27 inch barrel.Has a double thick pad.
Cases in picture are 20 bucks each...Ed

Yeah, You can shoot a turkey in the next county!:fighting0007: