RE: 12GA From Hell
 

I think its about time you did a field test. Lets see what one of those will do on a deer.

RE: 12GA From Hell
 

We have fellows using the heavy plastic case loads
and brass case loads in NEFs and Mossberg/REM
pumps, Savage bolt actions, getting deer and hogs
right along, Most don't post pics on net. I will see about
getting some of their pics on. I'm so busy experimenting, no
time to hunt. Deer line up out back like pets
chewing on the corn and hay, for me and the
dog to look at, no sport in shooting them anymore.Ed

RE: 12GA From Hell
 

Here is a picture of porting holes in a 10ga NEF
heavy long smooth barrel. Bbl 30" and 1.080" muzzle
diameter behind the screw in choke area. This come
with slightly extended screw in choke and is first
10ga with long barrel as heavy as my NEF 12ga FH
short barrel was.. OR the short NEF 10 gauges
with heavy barrel..It came with full and mod chokes.
The other 10ga I tested earlier, only .960" at muzzle.
I cut choke off and put it back in leaving the barrel
an open bore for slugs and leaving an area 1.2" long
for an internal brake to drill all the holes in like
Rob did with NEFs in his picture. Now the 1.2" long
area where holes are is bigger than needed for 10 ga
so a reamer in the making will solve that and solve a
major big bore project for me and others who asked
me about using the short NEF 10ga for upgrade, which
I didn't encourage putting all that work on a short
barrel gun, with the amounts of powder that will be
burnt in....are you ready.......THE 8GA FH.......
I have 8ga FH loads tested in reworked Enfield.....Ed

RE: 12GA From Hell
 

More info on the heavy barreled gun we plan on
making 8 gauge from. Nef SB2 103, 30" barrel,
regular stock. 220 bucks. 100 bucks for shop to
ream out to 8 ga smoothbore. Needs the 80 dollar
thumbhole stock. Nice deal for a modern 8ga, using
heavy duty plastic 3.3" long cases. I fired 6-8000
ft lb loads in one I made on Enfield, 4 times reloaded
without resizing cases.
Here is other project suggested by Boomie
on the AR big bore forum, the 16GA FH.
Cases made by me from bmg brass. Took 5 swagings, and
two turnings on my case spinner lathe.Two Annealings
Got couple cases made, in picture our 3.5" case and factory
16ga plastic case slug load. I'm getting test gun working
now and as for a supply of cases you all will have to
get with RMC if you want to rechamber a 16ga..Ed

RE: 12GA From Hell
 

Here is picture of my NEF 12GA FH as it is now,
A while back I got tired of short barrel and
added a foot on to it. Used breech end of left over
Savage and a sleeve. Lined up rifling and it has
same twist and number of rifling. Hard way to do
it. No need for rifling, or extra line up work.
Run many loads and it adds 150 fps with VV110,
4759, and 4227 powders. Adds about a 100 with
Blue Dot, and HS 7.
Next one will be done different and easier.
Next one will be a smoothbore add on piece of
groove diameter, 10-12 inches long, make it one
piece, 1 or 1 1/16" threads,about 1.2" diameter.
Threaded 1.5" long on original barrel, and into
add on piece, and will look like a brake and you
could put in internal brake in the end.Ed

RE: 12GA From Hell
 

Here is picture Stevens Revelation 350 16ga
now a 16GA FH. It got a 385 gr to 2000,
which is good for gun without a real heavy
barrel. I lengthened chamber for the
3.5" brass cases pictured that I made from
BMG brass. Anyone doing this can have cases
made by RMC. Gun is weighted to 11 lbs.
Action can handle more if barrel heavier. Ed

RE: 12GA From Hell
 

Here is picture of the bolt for my big gun, the 700HE.
It is holding a 700HE long case. The caseholder extraction system
can headspace a BMG rimless case,no belt, so you could
put on a 12ga barrel, straighten case more, from .700 to .729"
and have the rimless 12ga. Could straighten case for a
.750" bore, even to 10ga(.775") with a little thinning of the
top one inch of the case. Experimenting is interesting
to say the least. 700 slugs in pic are 1000gr Woodleigh,
1000gr PA, 825gr Copperhead Custom(CC), 770gr FP CC,
1000gr HP CC, 825gr HP CC..Ed

RE: 12GA From Hell
 

There is a new heavy barreled rifled slug gun out,
the Rossi Model S12 1230S. It will handle our heavier
loads like the NEF. And it can have chamber lengthened
for 3.5" plastic and RMC brass 12ga cases. Ed

RE: 12GA From Hell
 

It looks like you fire some of these with no brake? What on earth is the recoil like?? Detached retinas??

RE: 12GA From Hell
 

The guns are weighted and have thick pads. And balanced
right with long barrels, So they aren't that bad, actually
easier than most short barreled stuff with expansion brakes
on them,that give you a real bad dose of noise andblast.
You put on a long barrel to make use of theextra poweryou put
into the cartridge, then you weight the butt until itis balanced.Ed