This is my hobby and the experimenting is my hobby.And I don't
spend very much, I do my own work.A lot of items have been given to
me as people are willing to help out to get the info and ideas
checked out.Ed

I was asked how I got 8ga heavy barrel so quick.
First it is smoothbore, second a 110 bucks total shipping and all.
First I bought a 1.5 inch dia 4130 alloy, heat treated, shaft,
32" long. Then I had a deep hole drilling company drill
a .832" hole in it. Came out centered on both ends.
Then after it got here I used cylinder hone to polish
the inside of the bore. Threaded it, chambered it, and put
in the Enfield bolt action. The heat treating it had was just like
the barrel stock that barrel guys get. Ed.

For those wanting to see video of the 12GA FH in
the Savage busting big pail of water, one of the
kids posted it on Youtube- Titled "Grampa's Cannon".
I just found out that it is on there.
This was the video that the still pictures posted
before, was taken from. They have the sound
muted so as not to hurt camera sound system. Ed

Load of 12 triple ought buckshot in 8ga. They are
70gr each, total 840 gr, and over 2000 fps with
125 gr of 4759. Ed
Here is URL for the waterpail busting video above--
http://www.youtube.com/watch?v=rUNHszY4ACM

There are now two videos of 12GA FH on YouTube,
exploding big heavy walled pails of water.
The "Grampa's Cannon" one with a long view,
and "Grandpa's First Shot" a closeup video,
the first one, that shows how the top of heavy
shelf got bent. Later kids will do videos showing
muzzle blast and recoil.
Also the 3 ought buckshot from the 8ga load
above goes through 2" hardwood ok. I will test
8ga on waterpail also, to see what happens. Ed

I've got extra 28ga alloy rifled barrel now.
So along with first one in Enfield I will be doing one
in Mossberg 695 bolt action. Will add a little weight
to the stock and one of kids will see how it does on
deer this fall.Ed
Oh here is URL of the Grandpa's First Shot Video--
http://www.youtube.com/watch?v=c48zTpsgbuk

Here is pic of Mossberg 695 that will be the
second 28GA From Hell.You can see long
brass case in the port. Ed

Somebody suggested this picture to show the
difference between shotgun powder, factory loads
and our loads in plastic and brass as it relates to
increased powder capacity. Factory 3rd case with
small amount of powder(more wads), 2nd case plastic with
larger amount(less wads), 1st, brass case all powder.
This allows us more volume of slower powder.
Also the Videos, 'Grandpa's Cannon', 'Grandpa's First
Shot', are heading up to 3000 views on Youtube.
Any of you who could pass info about the videos out
over the net, I'd appreciate it. Ed

Here is closeup picture of Rob's 12GA FH Borchardt.
The long brass case shown has one of Rob's 2000
grain solid bore rider 12ga slugs. Ed

Got my long 700 HE case chambered barrel
finally in a bmg size action. It is barrel
I locked onto an I-beam and got testing and
load developement done over the last couple
years. Max load about 23,000 ft lbs.
It weighs 27 lbs, laminated thumbhole stock,
a max size pad, weighted butt, a reinforced
wrist, recoil barrel ring on front of stock.Ed