I get asked about hopping up 410s with brass cases.
A good drawn case is 9.3 x 74R. It'll work in 3"
410 chambers or shortened for shorter chambers.
I am not doing any just passing on info.Ed[/align]

Here is picture of a jacketed hollowpoint
12ga slug a fellow is going to make for us.
We hope to have tooling set up this summer
we plan on. Next to it is a 600gr Dixie hardened
slug. First ones he will probably make will
be about 700-750 gr.Ed

How musch does that thing kick it ,has to take your shoulder off.

The guns shoot about like a 10ga magnum in light gun. These are
heavy guns with a thick pads and right balance so they
shoot easy.Part of them have thumbhole stocks like
shown on NEF pic posted earlier, and that helps even more..Ed

The hollow pointed slug above can have a
light plastic/rubber nose for streamlining for
better BC, for 2-300 yard shooting.
In the 87 Win Levergun, smooth barrel,
long barrel, using brass RMC 3" cases,
1 oz Brenneke KO slug to 2700 with 4227
powder. Shotgun primer. I will be getting
some 3.5" RMC brass that he will put a special
longer corner radius in, to allow faster loads
with less case expansion and easier resizing.
Should get same slug to 3000 and resize
easier also. With shotgun primer able to use
4227, and you WON"T have to rework hammer
or firing pin to do big primers.ED

[/align]

I foundsome more cases used in little
cannons for bomb disposal. In pic, 2 on the left
are our originals, next 3 are resized
cases, exactly matching ours, and then on right
to be resized. Ed

nice

Here is picture of the Enfield bolt,
showing the 2 rear lugs I added.
The huge bolt handle base is 3rd lug.
Bolt handle needs polishing.This one
will be in the action for the 8GA FH.Ed

Here is picture of the 4 slugs I've used in
the 28GA FH load developement in the
3.25" long brass case and they
also work in the plastic cases. Ed

THE 8GA FH BELLERED TODAY. It is in Enfield I rigged with
rear locking bolt lugs. 32" barrel, tested 3.3" plastic cases.
Cases are the REM kiln gun cases. With the double cup base.
I shaved base a little so that chamber will fire these as well as
regular 8ga plastic. None of the firing today expanded base cups
at all, so they are real strong cases. Started testing to check
ignition with shotgun primers and to see if cases are any
good. Starting with a 110 gr mouse ball, wad under it, and 150 gr
of Blue Dot, about 5000 fps.. Gun didn't even recoil.Then a
410 gr one at 3000 fps, Then a 770 gr hollowbase slug in a wadcup
up to 2000 so far with 180gr of 7383. Barrel is smoothbore .832"
bore at the muzzle. Ed


[/align]