Hello everyone,
I just bought a stevens model 2007mm Rem Mag. I ordered weaver #46 scope mounts and 1" scope rings with a quick detach. Well last night i was mounting the scope and noticed that the rings were about 1/4-1/2 inch too far apart. The scope is a bushnell sharpshooter 3x-9x-32mm. I talked to weaver and they told meI need to use the Weaver Dual Extension Rings product # 49061. Each extension saddle(bottom half of the ring) will move the scope 1/2" either direction. Does this mean thatI will need to buy new ringsalong with the extension?Any of you have this problem or have any inputs on this?

Here is what you need to mount the scope on your rifle
http://www.midwayusa.com/esearch.exe/search?TabID=0&category_selector=all_products& amp;search_keywords=extension+ring&Click+to+Be gin+Search.x=13&Click+to+Begin+Search.y=8

No ,we call them offset rings and it's not unusual to need them on a savage rifle. That is on the long action. All you need is the rings they recomend and you'll be set to go.

The extension is built into the rings. You do not need different bases.

The ring on the left is an extension ring.