rem. 870 trigger pull?
10-09-2002 | 08:38 PM
#1
Thread Starter
Joined: Feb 2003
Posts: 47
Likes: 0
From: freeport il USA
rem. 870 trigger pull?
Has anybody had the trigger adjusted on there 870? Normally a heavy pull wouldn't bother me too much on a shotgun but, I spent the money on a cantilever barrel and a scope and I am not happy with my groups due to the heavy trigger. Just looking for suggestions or opinions on this trigger assembly and what everbodys experience is. I will be taking this to a gunsmith also.
10-12-2002 | 08:10 AM
#3
Joined: Feb 2003
Posts: 39
Likes: 0
From: CHESTERFIELD MICHIGAN USA
RE: rem. 870 trigger pull?
KEN P,
Trigger work on these trigger assembly are a tad different then all other trigger work.
But here is the run down, true and hone sear and hammer, for pull weight, alter trigger to remove creep, alter safety to make functional because you removed creep,alter disconector because of everything else you just did then install a trigger stop screw.
I do recommend having a smith that knows this tech.
RON KONTOWSKY
ACTIONS BY R.A.K.
CUSTOM GUNSMITHING
CUSTOM GUNSMITHING CUSTOM PISTOLSMITHING
Trigger work on these trigger assembly are a tad different then all other trigger work.
But here is the run down, true and hone sear and hammer, for pull weight, alter trigger to remove creep, alter safety to make functional because you removed creep,alter disconector because of everything else you just did then install a trigger stop screw.
I do recommend having a smith that knows this tech.
RON KONTOWSKY
ACTIONS BY R.A.K.
CUSTOM GUNSMITHING
CUSTOM GUNSMITHING CUSTOM PISTOLSMITHING
