trigger marlin 17hmr
#1
trigger marlin 17hmr
im looking to get a upgrade trigger mor my marlin 17hmr
I love this gun so much and herd ide like it even more with a new trigger dont know much about it though what should i expect out of it
i usually dont like small bore rounds but this is now my favorite ive seen the impact on coons through my scope and you cant beat that especially for a 189 plus scope
also what should this trigger cost
I love this gun so much and herd ide like it even more with a new trigger dont know much about it though what should i expect out of it
i usually dont like small bore rounds but this is now my favorite ive seen the impact on coons through my scope and you cant beat that especially for a 189 plus scope
also what should this trigger cost
#2
Typical Buck
Join Date: Jul 2004
Location:
Posts: 564
RE: trigger marlin 17hmr
If you have a paper mate pen the upgrade can cost $0, I just swapped out teh trigger spring with one froma paper mate pen, lots of other people have done it rimfire central. or you can buy a rifle basix trigger, I think there less then $100 in the US.
If you do the pen job you will need to shim teh side of the trigger because with the lighter spring alot of slop is reviled in the trigger. so just a small peice of brass or i even used pieces of a pop can for a little while.
Just remove the bottom c clip and the trigger and teh spring will come out then just throw in your new one. and place your shims in the little inlet on the trigger. if you need help or anything just Pm me.
O yeah the pen trick make a great trigger its nice and light but still very crisp with no Creap. Just make sure you test your work by giving it a good bump test to make sure it doesnt set off.
If you do the pen job you will need to shim teh side of the trigger because with the lighter spring alot of slop is reviled in the trigger. so just a small peice of brass or i even used pieces of a pop can for a little while.
Just remove the bottom c clip and the trigger and teh spring will come out then just throw in your new one. and place your shims in the little inlet on the trigger. if you need help or anything just Pm me.
O yeah the pen trick make a great trigger its nice and light but still very crisp with no Creap. Just make sure you test your work by giving it a good bump test to make sure it doesnt set off.
#3
RE: trigger marlin 17hmr
I put a RifleBasix trigger on my Savage 17hmr. I absolutely love this thing now. It is adjustable from 10oz to 24oz. It is fairly easy to instal by yourself, it took me about half an hour. I went slow and had no problems. It cost me $70. I knew about the pen spring trick, but wanted a trigger I knew would be safe. Not one that should be safe. Good luck.
#5
Join Date: Aug 2006
Location:
Posts: 299
RE: trigger marlin 17hmr
I've installedRifle Basix and Jardtriggers on 917's and wasn't impressed. They're a little better than the un-altered factory trigger, but surely not worth $90. I don't mind spending big dollars for triggers on my custom hunting rifles but I can't see spending 80% of the rifle's cost on a trigger.
917 factory triggers are simple to work. .015" off the sear,lightly roll thetrigger ledge, 1/4 coil off the sear and trigger weight springs, and you've got a 1lb, crisp trigger.
Of all my 22's and 17's I like my Marlin's the most. It's just hard to beat their barrels.
917 factory triggers are simple to work. .015" off the sear,lightly roll thetrigger ledge, 1/4 coil off the sear and trigger weight springs, and you've got a 1lb, crisp trigger.
Of all my 22's and 17's I like my Marlin's the most. It's just hard to beat their barrels.
#6
Join Date: Jan 2006
Location:
Posts: 368
RE: trigger marlin 17hmr
I'm in the same boat as you. I have a blued/walnut marlin boltin 17 HMR and love every aspect about it except for the horrable trigger... well its not too too bad... but soon as i find here i can buy a riflebasics trigger in Canada im gonna get it.