Barrel Length
10-12-2005 | 11:23 PM
#11
Nontypical Buck
Joined: Feb 2003
Posts: 3,516
Likes: 0
From:
RE: Barrel Length
I am working up a load for a kid'sRemington Model 77mm-08 Rem. with a 20" Barrel. The loading data uses a 24" barrel. The rifle is pushing a 139 gr. bullet 2300 f/s with a 20" barrel, and the data showes it is suppose to reach 2400 f/s with a 24' barrel. Good luck.
10-13-2005 | 07:08 AM
#12
Fork Horn
Joined: Jun 2005
Posts: 383
Likes: 0
RE: Barrel Length
ORIGINAL: SCHOOLBOY
(Ft/Sec.) Drop in Muzzle Velocity per 1"
2000-2500 10
2500-3000 20
3000-3500 30
3500-4000 40
These numbers are off of Remington's Rifle Balistic page.
(Ft/Sec.) Drop in Muzzle Velocity per 1"
2000-2500 10
2500-3000 20
3000-3500 30
3500-4000 40
These numbers are off of Remington's Rifle Balistic page.
10-13-2005 | 07:55 AM
#13
Joined: Mar 2005
Posts: 171
Likes: 0
RE: Barrel Length
Carts,
The table I posted is a general representationbased on velocity not caliber, I'm sure there are extremes at both ends of the spectrum. For example cut 2 inches off .308 and a 300 Weatherby Mag. Both have .308 dia. bullets but he 300 WM is going to lose many more Ft./sec. If you want exact #s you would have to look at case capacity/efficiency, bullet weight/ dia., and barrel length.Something to do on a rainy day.
The table I posted is a general representationbased on velocity not caliber, I'm sure there are extremes at both ends of the spectrum. For example cut 2 inches off .308 and a 300 Weatherby Mag. Both have .308 dia. bullets but he 300 WM is going to lose many more Ft./sec. If you want exact #s you would have to look at case capacity/efficiency, bullet weight/ dia., and barrel length.Something to do on a rainy day.
